AirFit P30i

Offering a pillows cushion option for those who prefer a top-of-the-head tube design
Top-of-the-head tube design gives you the freedom to sleep in many positions
QuietAir^TM diffused venting designed to minimise noise and disruption
SpringFit frame adapts for a stable, personalised fit
Minimalist design leaves your face clear so you can wear glasses to read or watch TV

Simplify your bedtime routine

The mask is specifically designed to slide quickly on and off for an easy bedtime routine. The quick release elbow makes it easy to disconnect the mask from the tubing if you need to get up at night.

Freedom to be you

ResMed AirFit P30i features a top-of-the-head tube design that gives you the freedom to sleep in many positions.

Get closer to your partner

Sleep more freely and closer to your bed partner. With no front-end tube, the mask stays out of sight and out of the way. Also featuring ResMed's QuietAir^TM technology, the mask gently diffuses exhaled air to minimise noise, allowing you to sleep closer to your bed partner.

Explore

Support

Sizing frame

Go to the sizing section in the user guide to determine which frame size is most suitable.
If you are male, start with the standard frame size. If you are female, start with the small frame size.
If you try the standard size first, and the frame sits too close to your ears, size down to the small frame for a better fit.
If the frame is too large, try the small size frame for a better fit.
If you try the small frame first and the frame sits too close to your eyes, size up to the standard frame for a better fit.
If the frame is too small, try the standard size frame for a more comfortable fit.

Additional resources

For additional therapy assistance.

Documents

AirFit N30i P30i Combined User Guide

Assembling the mask

Ensure you have all the mask components and parts together.
Connect the elbow to the top of the frame until it clicks in.
Insert the headgear straps into the frame and fold the fastening tabs back to secure.
Insert the ends of the frame into the cushion while ensuring that the arrows present on both the cushion and frame are aligned.

Fitting

Pull the mask frame and headgear over your head so that the elbow is at the top of your head and the headgear is behind it.
Place the cushion under your nose and align the pillows into your nostrils.
Tighten or loosen headgear until the mask and cushion fit comfortably.
Squeeze the elbow's side buttons and pull the elbow away from frame.
Connect the air tubing from your device to the elbow and then reattach the elbow to the frame.

Disassembly

Ensure your mask is disconnected from your machine.
Pull the cushion out from the frame.
Unfasten the tabs from the headgear and pull the straps out of the frame.
Squeeze the elbow's side buttons and pull the elbow up and away from the frame.

Helpful resources

For additional therapy assistance.

Documents

AirFit N30i P30i Combined User Guide

Managing mask leak

If air escapes the mask from anywhere other than the masks vents, you will need to locate the leak and try each of the following steps to correct it.
Try wiggling the mask side to side to realign the cushion and the pillows.
Try resealing the mask by pulling the cushion and pillows away from your face and letting them settle back into position.
Try adjusting the headgear straps to secure the cushion closer or further from your face.

Daily mask cleaning

Take the cushion off the frame as per disassembly instructions.
Soak the cushion in warm water and a mild liquid detergent, and ensure there are no air bubbles while soaking.
Hand wash the cushion with a soft bristle brush, paying extra attention to the vent holes.
Rinse the cushion thoroughly under running tap water.
Shake the cushion to remove excess water.
Leave the cushion to air dry away from direct sunlight.

Weekly mask cleaning

Disassemble the mask into its components as per disassembly instructions.
Soak each of the components (headgear, elbow and frame) in warm water and a mild liquid detergent, and ensure there are no air bubbles while soaking.
Hand wash elbow and frame with a soft bristle brush and the headgear with your fingers.
Rinse each of the components thoroughly under running tap water.
Squeeze the frame sleeves on a clean towel to remove excess water.
Leave the mask components to air dry away from direct sunlight.

Mask inspection

Examine the mask system and familiarise yourself with its components.
Disassemble the mask as per the user guide instructions.
Examine the headgear for any tears and damage.
Examine the elbow for cracks, blockages and damage.
Examine the frame for cracks and damage.
Examine the cushion inside and out for tears and damage.
Pull the vent out of the cushion and examine it for blockages and damage.
Reassemble the mask as per the user guide instructions.

Helpful resources

For additional therapy assistance.

Documents

AirFit N30i P30i Combined User Guide

Getting started with therapy

Here are some links to help your patients get on the right track with the sleep therapy..

Your therapy basics

The how, what, where and why...

The benefits of therapy

What does therapy do for you..

Think positive

Some helpful tips

Why ResMed?

The #1 mask brand preferred by patients*

The first company to bring CPAP technology to the world.

More than 25 years of experience in sleep and respiratory medicine.

Reference

ResMed external 7 days clinical study of existing 24 ResMed and non-ResMed patients, conducted between 21/02/2018 - 12/03/2018. Data on file; ID A4320645.