AirFit N30i

Top-of-the-head tube design gives you the freedom to sleep in many positions
Curved nasal cradle cushion covers less of your face than a traditional nasal mask and sits discreetly under your nose, not in it
SpringFit frame adapts for a stable, personalised fit
Air flows through the frame for a soft yet secure cradle seal
Minimalist design leaves your face clear so you can wear glasses to read or watch TV

Sleep the way you want

ResMed AirFit N30i features a top-of-the-head tube design that gives you the freedom to sleep in many positions. The nasal cradle cushion sits comfortably under the nose rather than over the nasal bridge - great for side or stomach sleepers.

Get closer to your partner

Sleep more freely and closer to your bed partner. With no front-end tube, the mask stays out of sight and out of the way.

Simplify your bedtime routine

The mask is specifically designed to slide quickly on and off for an easy bedtime routine. The quick release elbow makes it easy to disconnect the mask from the tubing if you need to get up at night.

Explore

FAQ

The AirFit N30i is designed to provide freedom of movement so you can sleep in the position you find most comfortable, including your side and stomach. The curvature of the cushion and the grip from the SpringFit frame will assist in keeping the mask in place under your nose as you move¹ .

The AirFit N30i is compatible with the majority of ResMed's PAP machines designed for home use, except for the AirMini machine, which has a designated range of compatible masks. For more information on mask and device compatibility, refer to our mask guide on ResMed.com.

The AirFit N30i delivers therapy from a wide variety of sleeping positions. Even when you are lying on your side, when air flow could potentially be reduced through one side of the frame, the mask will still continue delivering the prescribed therapy by compensating through the other side.

Cleaning the AirFit N30i is similar to cleaning other CPAP masks. When the elbow, headgear and cushion are removed from the frame, the AirFit N30i frame is one component that can be cleaned in a similar way as the short tube of other nasal masks or the long CPAP tubing. Wash all components with warm water and mild liquid detergent, rinse thoroughly and let air dry out of direct sunlight. For the frame sleeves, squeeze with a clean towel to remove excess water. Always refer to the AirFit N30i User Guide for full cleaning instructions.

The AirFit N30i is only available with the nasal cradle cushion.

The sound level of the AirFit N30i is within the same range as other ResMed nasal masks. Conductive noise through the mask may be heard by some users, however, other users tell us they prefer the freedom of movement and less obtrusive top-of-the-head tube design of AirFit N30i over masks with tubes at the front.

The AirFit N30i was specifically designed to slide on and off quickly for an easy bedtime routine. Pull the frame and headgear over your head until the elbow is positioned on top of your head. Place the cushion under your nose, and then adjust the headgear as necessary. To connect the tubing, pinch the side buttons on the quick-release elbow to remove it from the mask. Insert the tubing and reconnect the elbow to the mask. The quick-release elbow makes it easy to disconnect the mask from the tubing if you need to get up at night.

Yes, a chin strap may be used with the AirFit N30i. If using a chin strap, it should not occlude the frame (i.e. it can be used under the mask frame). There is a risk of sub-optimal to no-therapy if both sides of the frame are occluded by the chin strap.

The AirFit N30i is available in four cushion sizes: small, medium, small wide and wide. To find the right cushion size, place the sizing gauge under your nose. Long, pointy noses will use the blue and red side of the gauge while short, wide noses will use the purple and grey side. Look at both the width and length of the nose on the gauge. If either part of the nose breaches to the second colour, size up to the larger cushion (medium or wide).

Red S = Small

Blue M = Medium

Purple SW = Small wide

Grey W = Wide

The AirFit N30i will use the pillows setting for AirSense™ 10, AirCurve™ 10 and S9™ machines.

Support

Sizing frame

If you are male, start with the standard frame size. If you are female, start with the small frame size.
If you try the standard size first, and the frame sits too close to your ears, size down to the small frame for a better fit.
If the frame is too large, try the small size frame for a better fit.
If you try the small frame first and the frame sits too close to your eyes, size up to the standard frame for a better fit.
If the frame is too small, try the standard size frame for a more comfortable fit.

Additional resources

For additional therapy assistance.

Documents

AirFit N30i P30i Combined User Guide

Assembly

Ensure you have all the mask components and parts together.
Connect the elbow to the frame.
Thread the left end of the headgear into the left side of the frame and fasten the tab.
Thread the right end of the headgear into the right side of the frame and fasten the tab.
Align the arrow on the cushion to the arrow on the frame and connect together.
Connect the remaining end of the cushion and frame together with the ResMed logo facing the right way up through the headgear.

Fitting

Bring the mask above your head and then down over your face while ensuring the elbow is centred on the top of your head.
Place the headgear behind your head and the cushion under your nose.
Adjust the headgear until the mask and cushion are comfortable.
Disconnect the elbow from the top of the frame and attach it to the air tubing.
Reconnect the elbow with the air tubing to the top of the frame.

Disassembly

Ensure your mask is disconnected from your machine.
Pull the cushion out from one end of the frame.
Pull the cushion out from the other end of the frame.
Unfasten the headgear tab from one side and pull it out of the frame.
Unfasten the headgear tab from the other side and pull it out of the frame.
Squeeze the side buttons on the elbow and pull up to release it from the frame.

Helpful resources

For additional therapy assistance.

Documents

AirFit N30i P30i Combined User Guide

Weekly cleaning

Disassemble the mask into its components as per disassembly instructions.
Soak each of the components (headgear, elbow and frame) in warm water and a mild liquid detergent.
Clean the elbow and frame with a soft bristle brush and the headgear with your hands.
Rinse each of the components thoroughly under running tap water.
Squeeze the headgear and the sleeves on the frame with a clean towel to remove excess water.
Leave each of the components to air dry away from direct sunlight.

Helpful resources

For additional therapy assistance.

Documents

AirFit N30i P30i Combined User Guide

An ecosystem of solutions for individual answers

From diagnostics and healthcare informatics to therapy devices and masks, our solution can help you get a better night's rest. Crafted to offer both confidence and flexibility, our products allow for a high-quality therapy experience catered to your needs.

Our device, mask and accessory ranges, together with our online support program myAir™, enable you to easily customise your therapy experience to your preferences.

Devices

Masks

Accessories

Why ResMed?

The #1 mask brand preferred by patients*

The first company to bring CPAP technology to the world.

More than 25 years of experience in sleep and respiratory medicine.

Reference

ResMed external 7 days clinical study of existing 24 ResMed and non-ResMed patients, conducted between 21/02/2018 - 12/03/2018. Data on file; ID A4320645.